All
credit card orders are processed by CCNow. Customers can be sure that all information
supplied are secured and will not be used for any other
purpose other than this sale transaction. MN customers
in USA are recommended
to use paypal
Please
note that credit card order (minimum order $11.50 excluding postage) can only
be sent to card holder at his/her registered address. We may not be able to process
credit card orders for card issued by some countries. In that case or if you do
not have a credit card, please see other methods of payment
including paypal MN
customers in USA are
recommended to use paypal
View
Shopping Cart / Checkout February 28,
2006 - New style/system for PDA/GPS
introduced. If you are
buying GPS/PDA connecting cables for the first time we recommend you consider
the new style which include power for the GPS while our
old style on this page does not allow you to power the GPS (as GPS must use batteries).
Our old style has been available for a few years and we will continue to support
previous customers who wish to add/change interface cables to the ones already
owned. -------------------------------------------------------------------------------------------------------------------------
Pc-Mobile
GPS connection solutions (PDA
and Garmin E) There
may be too much information in this page. Though we think all are clear to many,
some may feel confused. If you are in doubt, please check with us before you make
an order in order to avoid making a wrong order thus costing yourself and us time
and expense.
Our GPS cables are unique, versatile (upgradeable) and
affordable. As tradition of our innovative ideas, we make the main cables (Garmin
E or Rtype,
Rino, Foretrex,Magellan,
etc) which you can connect to many interchangeable PDA and PC interfaces
so that you can add additional interfaces (or change) at low cost, as and when
you change a new PDA. Our GPS cables are compatible with almost all recent GPS
as follow: Garmin
E-type (prefix-GE) - eMap,
all Etrex, Geko 210/310 Garmin
R-type (prefix-GR) - all Garmin
GPS with Round plugs
: GPSII/III/V/12/30/40/45/48/60/89/90/76/72/StreetPilot,
etc. Garmin
Rino (prefix-GO) - Rino
110, 120, 130. Garmin
Foretrex(prefix-GX) - Foretrex
201, 101 Magellan
(prefix-GM) - M310/320/330,
SporTrak and current Meridian
series. Magellan
(prefix-GS) - eXplorist
100/200/300 Lowrance
(prefix-GL) - iFinder,
iFinder Pro Lowrance
(prefix-GF) - iFinder
H2O, Map/Music, Hunt, PhD
If you want to connect
your GPS to a PC with only USB
port please see USB>GPS page.
Many Interfaces are compatible with many PDA models. Please see
compatibility list at the bottom of the page to find whether your PDA is listed
before asking.
Packages on this
page are for Garmin E type - eMap, eTrex all models
(except VistaC/LegendC and colored eTrex models),
Geko 201/301 Important note:
the new VistaC
and LegendC and
all colored eTrex models
do not have E type serial port like other eTrex models. Therefore cables on this
page are not compatible. In fact they do not even seem to have serial port so
they CANNOT connect any PDA! (prospective VistaC
and LegendC purchasers
should consult Garmin before making the purchase if you intend to use these with
a PDA)
CODE
DESCRIPTION
(cable for Garmin side only without interface)
PDA
Combo Interfaces (with power input so you may never run out of power from your
PDA) The
power input is standard 4.0/1.7 socket so you may already have the car/ac adapter
for its use.
Special
offer: following are packages of main cable (GPS side) + Combo Interface Adapter (considerable saving from buying cable and interface
separately)
Note: Ipaq
36/37xx, Casio, HP Jornada,
Fujitsu Loox 6xx (not 7xx), Asus A620 and Axim
X5 have separate power
input so do not need any Combo interface. Power Accessories : for interface with
power input
Car
USB adapter - 5v -
for all PDA
requiring 5v-5.4 input Charge your PDA in
car/truck with this versatile adapter. (use USB charge cable of your PDA).
Input - 12-30v output - 5v See: Detailed specification and notes
5v
Car USB adapter / cable set Output
5v - for all
PDA requiring 5v-5.4v input Car USB adapter (CK203)
+ USB charge cable (PUC2)
in one package at reduced price. This
is perfect to use with our Combo GPS interfaces.
DC
Adapter Dongle - with universal 4.0/1.7
DC jack, with built
in 3.3v voltage regulator You
can now power your GPS with the 5v
AC/Car adapter you may already have! Or use CKUC/PB4A
from here.(using
PB4A with 4 AA bateries
to power Geko makes
a lot of difference like in the Arctic!!) Cable
length: 10cm
Car
USB adapter - 5.5v -
for E125/EM500, Sony Clie S/N series,
Charge your PDA in car/truck with this versatile adapter. (use
USB charge cable of your PDA). Input - 12-30v
output - 5.5v See:
Detailed specification and notes
5.5v
Car USB adapter / cable set 5.5v
- for E125/EM500, Sony Clie S/N series,
only Car
USB adapter (CUSB)
+ USB charge cable (PUC2)
in one package at reduced price. This
is perfect to use with our Combo GPS interfaces.
Power 2 devices (same input) with just
one power source. e.g. 2 PPC, or 1 PPC and 1 BT GPS from one car cigar lighter
car adapter. 50cm each end
so 2 devices can be spread up to 1 metre apart. (please
note our minimum credit card order is $11.50 excluding postage)
AA
Battery Extender Box (with on/off switch) 4.0/1.7
universal plug (batteries
not included) You can never be afraid
of running out of power (and lost) for your next long journey ( ? hike in the
mountain) with this low cost and convenient solution. - for
use with combo interface. See: Detail
Special
offer: following are packages of main cable (GEDC)
+ Interface Adapter + Universal car USB cable set (CKUC/CPUC)
which include everything that you need to use your GPS with your PDA and power
the PDA in your car. (considerable saving
from buying cable and interface and car adapter separately)
(Note:
GPS is NOT powered, GPS must use internal batteries) If
you do need/want to power both PDA and GPS in car, see our new
GPS interfaces with power to GPS. Other
connecting cables:
CODE
DESCRIPTION
PRICE
(US$)
GDXN
Null
Modem connecting cable (GD) for connecting 2 PDA through our PDA interface
cables for exchange of GPS data such as displaying GPS
data simultaneously on 2 PDAs. (2.5mm stereo
plug >2.5mm stereo plug with data pins cross over) It
is made specially for use with our own PDA GPS interfaces and will not work for
any other purpose. length: 1.2 metre
There
may be too much information in this page. Though we think all are clear to many,
some may feel confused. If you are in doubt, please check with us before you make
an order in order to avoid making a wrong order thus costing yourself and us time
and expense. COMPATIBILITY
LIST
Compaq
Ipaq 31xx, 36xx, 37xx NOT for new rz/rx34/37xx
series
GXDA/P
O2/XDA,
T-Mobile, AT&T SX56, SPV1,2,3
XDA2 - see detail below
GAX3/P
Dell
AXIM X3/30 series
GFLX/P
Fujitsu
Pocket LOOX 6xx, 7xx ?4xx (not tested)
GV35/P
Viewsonic
V35/36/37, Mitac Mio 338/528, Yakumo Delta/Packard Bell 2030/ NEC E200
GQ38/P
Compaq
Ipaq H38/39xx, 54/55xx, 22/ 41xx, , rz34/37xx, hx47xx,
rz17xx NOT 19xx series
(see below)
GHJ5
HP
Jornada 54x, 56x
GCA1
Casio
E115/125/EM500
?E100/105 ?E-800
GSN7/P
Sony
Clie S300/320/360/500, N610/700/710/750/760/770 do not confuse
this with Sx//Nx
below
GST6/P
Sony
Clie T400/415/425/600/615/625, NR/NX/NZ/SJ/SL/ST/TG/TJ/TH/xx series
?SL10,
GHSV
Handspring
Visor Deluxe, Prism ?Platinum/Neo
See Note
GP50/P
Palm
M500/505/515, i705 ,M125/130, (NOT Tungsten
E - Zire71, ?Tungsten
T/ C/W see below)
GPZ7/P
Tungsten
C/W/T/T2/T3, Zire71
GPVX
Palm
V/Vx
GP03
Palm
III, IIIc, IIIe, IIIx, VII, ?Hand Era
GTTC
TomTom
Car mount (or compatible such as Seidio G2500) with RJ11 GPS input
HP Ipaq 19xx, Tungsten E, Zire,
Zire32/72, Toshiba e310, Sony Clie UX50 - these
PDA do not have serial ports so it is not possible to connect any GPS via cable.
Therefore we do not have interfaces for these models. However,
you can use bluetooth adapter for any BT enabled PDA.
Palm Zire71/Tungsten
- The Zire71universal
seems to be slightly different from previous Palm models (M5xx) in that the connectors
(GP50/P) we have
been using for a long time could not lock into Zire71.
There was no reason form Palm to change the connector and we would suspect this
as design defect. It is also the same with a small portions of Tungstens.
Therefore we have made the interface (GPZ7/P)
with a new connector that can lock into Zire71.
While most Tungstens
can use GP50/P
with no problem, we recommend Tungstens
owners to order GPZ7/P parts
to be on the safe side. GPZ7/P
can also be used with old M5xx models but it is not as good as GP50/P.
XDA3 (XDAIIs
- identified with a sliding keyboard)
- GXDA is compatible.
If you bought GXDAP
before Nov 30, 2005
it is not compatible. But new ones you order now are compatible as we have
now modified it to be compatible with both XDA1
and XDA2. If
you bought GXDAP
before Nov 30, 2005
(within a package or on it own) for use with XDA1/2
but now want to use it with XDA2/3
please write to us.
If
you want to connect your GPS to a PC with only USB port
please see USB>GPS page. For
Toshiba e740 cable see Toshiba page. Need
a connector to make your own cable? see here.
There may be too much information in this page. Though we think all
are clear to many, some may feel confused. If you are in doubt, please check with
us before you make an order in order to avoid making a wrong order thus costing
yourself and us time and expense.
If
you have questions related to our GPS products (cables) please write to: pcmgps
@ pc-mobile.net
