Information  -Acer n30/n50HP IpaqPalm V / H.S.PDA>SerialKyocera 7135Mio 8380MPx200G. Rino - GOG. Rino - GUORS DigitravelerNikon CablesCCNOW order -Axim X5/x3/30FujitsuLoox TSony ClieBT AdapterSony P800NEC616Iphone / IpodMagellan M/SMagellanM/SMeXplorist 456-Terms/conditions  -Axim X50/50VToshibaiQue 3600DC AdaptersHitachi G1000Samsung i700-eXplorist  123eXplorist 123--Delivery/cost GenericCasio PPCViewsonic/Mio--Siemens SX1Sharp GX32Zen Vision: WL iFinder GOL iFinderGOUSB>GPSGenericContacts Cable/adapterEten M500T-Mobile/XDAHTC_HermesConnectorsEten M500T-Mobile/XDAZen Vision: ML iFinder H2OL iFinderH2OGPS AntennaCable/adapterSupport                                                                                                                                                              View Shopping Cart / Checkout
Microphone / Stereo Headphone Adapter for Ipad / Iphone
CODE-Part descriptionpricein US$
IPMSPlug into Ipad/Iphone headphone jack.
It allows you to plug in separate Stereo Headphone and Mono Microphone (e.g. PC Headsets).
You can use any quality external microphone (mono) with 3.5mm plug.
Or connect to external Speakers or Hi-Fi. 
You can make line in (mono) recordings through mircophone jack with suitable apps.
Compatible with Skype or other apps with recording functions. 
Microphone Jack is shorter (grey) for indentification purpose
Cable length: 13 cm
12.75
Buy It

Breakout Boards for Iphone / Ipod / Ipad
Breakout boards make it easier for hardware/software developement and hacks for Iphone / Ipod / Ipad.
We offer 2 versions for different needs.
Basic Breakout Board

with large 2mm x 2mm pads which requires minimal soldering skill.
All pins are available on both sides.

Board size: 40 mm x 20 mm.


Enhanced Breakout Board
Features:
1. pins/pads are laid out logically rather than in numerical order.
2. All pins are accessible on both sides, with multiple ground pins/pads, and large 2mm x 2mm pads which are easy to solder. 
3. Provisions are made to accommodate 3.5mm LINE IN and LINE OUT jacks, Composite Video RCA jack, and Mini USB B female port. 
4. By connecting a mini USB cable makes it easy to provide 5v power to any device you try to connect, as well as making it possible to sync/charge the iphone/ipod. (note: it may be necessary to modify pin connections for audio/video/sync/charge functions for different ipods/iphones)
5. Ground pins of 1 and 2, 15 and 16, 29 and 30 are shorted (connected), additional ground pads are added.
6. The board can be supplied with 3.5mm line in/line out jacks (pin 11 connected to ground OR pin 21 with a 68k resistor to ground  to direct audio to line out) and Mini-USB port assembled, and a separate RCA video jack so you can solder it in if needed.
7.  A 68k and/or 510k resistor can be supplied free of charge on request with every boad ordered.
Board size: 40 mm x 36 mm.

Back side 
of board

Ipod /Iphone pin out information   and  here.
CODE-Part descriptionpricein US$
IPB-BBasic Breakout Board8.95
Buy It
IPB-EUOEnhanced Breakout Board

With Mini-USB and Audio Out connectors supplied, NOT soldered (assembles).
(note: it may be necessary to modify pin connections for audio/video/sync/charge functions for different ipods/iphones)

13.95
Buy It
Bare Boards and parts options:
CODE

PRICE
IPB-BBBasic Bare Board without connector$5.95Buy It
IPB-EBEnhanced Bare Board without connector$9.95Buy It
IPBC01Connector for use with above boards$ 2.50Buy It
IPBC05
Pack of 5 Port Connectors$10.00Buy It
IPBSAV
3.5mm Stereo Jack and RCA Video out connector for IPB-E(suggested addition to IPB-EUO)$ 1.20Buy It

You only pay $5 shipping for orders up to $100 !!
Click here for Postage/delivery methods and cost.
Please see our terms/conditions of sale and other relevant information.
Warranty: 6 months

FAQ:

Q: In order to enable line Out, what is the difference between putting a 68K resistor between pin 21 and Ground and connecting pin 11 and Ground?
A: It depends on what device you are using. In the case of Iphone 3G, connecting pin 11 and Ground results in warning message:
"This accessory is not made to work with Iphone
Would you like to turn on airplane Mode to reduce audio interference?
You will not be able to make or receive calls.
Yes or NO"
You would just choose "NO".
Putting a 68k resistor between pin 21 and ground has the same function but no such warning message would appear. Many people may want to put different resistor value between pin 21 and Ground for different reason (e.g. 510k to enable serial port) therefore connecting pin 11 and Ground is the only option.

If you have questions related to above products please write to: iphone (at) pc-mobile.net
HomePocket PC  Cables Palm OS -Audio AdaptersSony PSPold GPS cablenew cables   Other GPSNikon Camera Information
 -Acer n30/n50HP IpaqPalm V / H.S.PDA>SerialKyocera 7135SE 750/800PSP 1000Garmin E-GEGarmin E-GUEG / Foretrex-Order Tracking
-Asus  A730HP JornadaPalm M/T/Z71USB>serial-PDASPV /TanagerTreo 600 PSP SLIMGarmin R-GRGarmin R-GURDelorme USBNikon GPSPaypal order
Latest NewsAsus  A620Fujitsu LooxPalm T5/T650USB>serial- PCMio 8380MPx200G. Rino - GOG. Rino - GUORS DigitravelerNikon CablesCCNOW order
-Axim X5/x3/30FujitsuLoox TSony ClieBT AdapterSony P800NEC616Iphone / IpodMagellan M/SMagellanM/SMeXplorist 456-Terms/conditions
 -Axim X50/50VToshibaiQue 3600DC AdaptersHitachi G1000Samsung i700-eXplorist  123eXplorist 123--Delivery/cost
GenericCasio PPCViewsonic/Mio--Siemens SX1Sharp GX32Zen Vision: WL iFinder GOL iFinderGOUSB>GPSGenericContacts
Cable/adapterEten M500T-Mobile/XDAHTC_HermesConnectorsEten M500T-Mobile/XDAZen Vision: ML iFinder H2OL iFinderH2OGPS AntennaCable/adapterSupport