All
credit card orders are processed by CCNow. Customers can be sure that all information
supplied are secured and will not be used for any other
purpose other than this sale transaction. MN customers
in USA are recommended
to use paypal
Please
note that credit card order (minimum order $11.50 excluding postage) can only
be sent to card holder at his/her registered address. We may not be able to process
credit card orders for card issued by some countries. In that case or if you do
not have a credit card, please see other methods of payment
including paypal MN
customers in USA are
recommended to use paypal
For
use with PC with USB port (but no Serial port) to connect to serial devices such
as PDA for serial hotsync, mobile phone (data cable required) for data access,
and GPS (serial cable required) for mapping software and data exchange.
Using
the popular Prolific PL-2303hx USB to Serial Bridge
Controller (many newer USB>serial converters
use some newer cheaper controllers and may have compatibility problems),
it is compatible with all recent OS (WinXP, 2K, ME, 98) and most makes of PC.
Note
it supports PC only, no PPC driver is available.
Pc-Mobile
USB to Serial Converter
Small, light and compact,
ideal for laptop use. After installation of driver,
it adds a virtual com as if it was in the PC. Cable
length is only 14cm and weigh less than 22gm. It
must be the shortest, lightest and thinnest USB>Serial converter in the world
Updated drivers for WinXP, 2K, ME 98, Linux, Mac, can
be downloaded from Prolific
site.(let us know if link is broken as it may be changed from time to time). We
can also supply link to download from our site (Windows only)
When I connect USB2SX
with a GPS, Windows detects Microsoft Ballpoint device then the mouse cursor on
screen becaomes erratic, what happens and what should I do? This
can happen sometimes with cables using PL-2303 controller, particularly if you
connect all cables before you switch on computer, or you connect USB2SX
and GPS cable and then insert USB2SX into
USB port. Solution: 1. Disconnect USB2SX
and GPS cables. 2. Reboot computer 3. Connect ONLY USB2SX
to USB port 4. Connect GPS cable It
should now work normally.
I connect a GPS with
PC serial cable to USB2SX, everything seems to be OK but the GPS software cannot
detect the GPS? USB>Serial Converter driver installs a virtual
port AFTER all physical com port in the PC (if any), internal modem, AND
othe virtual com ports (such as mobile phone modems) you may have installed. So
the com port installed may be 3, or 4, or 7,8 etc. Most GPS software can only
be configured to use com 1 to 4, some even can only use com 1. So you have to
re-assign (re-arrange) the com port that USB2SX
uses, and the one that your GPS software uses so that they match.
Do
you make a longer cable? The beauty of this adapter which stands
out from others is its size/length/weight which is favoured by most users especially
with a laptop. If you do need a longer cable you can easily get an extension
(either USB or serial end) from any computer shop For further enquiries, please
write to: info-pcm @ pc-mobile.net
